Product Center 产品中心

产品中心

当前位置: 首页 > 产品中心
 TE06 改性煤焦油环氧底漆
来源: 点击数:254次 更新时间:2019-6-4 9:01:34
产品名称:OMELON TE06
产品介绍:

Specification Data     

技术参数

Binder Type/Pigment Type             Epoxy,thermoplastic polymers/Chemical

and abrasion resistantpigments

基料类型/颜料类型 环氧,热塑性聚合物/耐化学和耐磨性颜料

Colors                               TE0699(black),TE0660(brown)

颜色 TE0699(黑色),TE0660(棕)

Finish                               Matte

表面 哑光

Mixing ratio                         0.8(base)to 1(curing agent) by weight;

混合比率                             1(base)to 1 (curing agent) by volume

重量比0.8(基料):1(固化剂);

体积比 1 (基料):1(固化剂)

curing agent CA15

固化剂 CA15

Specific gravity(Mixture)             1.20± 0.03Kg/Lt

比重 1.20±0.03公斤/

Solids by Volume                      55% (Theoretical)

体积固体份 55%(理论上)

pot life                              5 hours at 23℃73,4)

混合使用期                            5小时,23℃条件下

Flash Point(Abel)   Base:>42(>108);Curing Agent: >30(>86)

闪点                                     基料:>42℃ ;固化剂:>30

Theoretical covering capacity   5.5 Sq.m/Lt. (224 sq.ft/US gal.) at 75 microns (4 mils)DFT

理论覆盖率 5.5平方米/升,100μm干膜厚度

Typical film thickness per coat Wet:182 Microns (7.2mils); - Dry: 100 microns(4 mils)

单层膜厚                                 湿膜:182μm;干 膜:100μm

Thinner             Material: EURO-thinner TH103;Cleaning: EURO-thinner TH03

稀释剂                                   材料:TH03,清洗:TH03

VOC                                       >340 grams/Lt

挥发性有机化合物 >340/

Drying time                           Surface dry: approx 1 hour (at 23(73.4)

and 50% relative humidity)

干燥时间                             表干:1小时, 23(73.4)50%

Overcoating time                       Min:12 hours at 23(73.4)-Max:7days

重涂时间 最短:12小时,23℃条件下,最大:7

Recommended primers                    When applying on top of aged coatings,

make sure they are in sound conditions.

推荐底漆                              涂刷在旧涂层上时,确保其状态良好。

Ambient temperature                 Min.: 5(41)-Max: 40(104).Avoid applications

with relative humidity higher than 85%.

环境温度 最低:5℃,最高:40℃相对湿度不得大于85%

Substrate temperature               Min: 4(7) above the Dew Point; Max: 40(104).

底材温度                            最低:露点以上4℃      最高:40

Storage and shelf life                      The product should be kept in a cool well ventilated places

储存及有效期                   protected  from high temperatures. Containers MUST BE

kept tightly closed.  Shelf life: 1 year.

产品应在阴凉并有良好的通风处保存,防止高温。容器必须牢固密封。有效期:1年。
【刷新页面】【加入收藏】【打印此文】 【关闭窗口】
上一篇:TH01 醇酸稀释剂 下一篇:PS01 醇酸木器底漆