Product Center 产品中心

产品中心

当前位置: 首页 > 产品中心
 PE03 铝粉环氧涂料
来源: 点击数:215次 更新时间:2019-6-4 9:03:27
产品名称:OMELON PE03
产品介绍:

SPECIFICATION  DATA

技 术 参 数

Binder Type/Pigment Type           Epoxy/amines with anticorrosive aluminum pigments

基料类型/颜料类型                环氧/胺树脂/防锈铝粉

Colors                             Grey Aluminum

颜色                               铝灰                                       

Finish                             Semi-gloss

表面                               半光

Mixing ratio                       2.8(base) to 1(curing agent) by weight 

                                   2.6(base) to 1 (curing agent) by volume

混合比率                           重量比2.8(基料):1(固化剂)

                                   体积比2.6(基料):1(固化剂)

Curing agent                       CA23

固化剂                             CA23

Specific gravity                   1.18±0.03Kg/Lt

比重                               1.18±0.03公斤/

Solid by Volume                    85%(theoretical)

体积固体份                         85%(理论值)

Pot Life                       4 hours at 23℃(73.4 )

混合使用期                          4小时,23(73.4)

Flash point(Abel)                   Base: >25℃( >77) Curing Agent: >43>109

 闪点                               基料:>25;固化剂:>43

Theoretical covering capability     8.5 Sq.m/Lt.(347 Sq.ft/US Gal) at 100 microns (4 mils) DFT   

理论覆盖能力                        8.5平方米/升,100μm干膜厚度

Typical film thickness per coat   Wet: 118 microns (4.7 mils); - Dry: 100 microns (4 mils)

单层膜厚                            湿膜:118μm ;干膜:100μm  

Thinner                             Material: EURO-thinner TH03 Cleaning: Euro-thinner TH03   

稀释剂                              材料:TH03  清洗剂:TH03                           

VOC                                 183 grams/Lt

挥发性有机化合物                    183/

Drying time                        Surface dry: approx. 4 hour (at 23℃(73.4 )

                                   and 50% relative humidity)

干燥时间                           表干:4小时,23℃73.4℉50%的相对湿度

Overcoating time                 Min:16 hours at 23℃(73.4 ) ?Max: 10 days

重涂时间                            最短:16小时/23- 最长:10

Recommended primers                 Self

推荐底漆                            本产品

环境温度                            低:10℃,最高:50℃,相对湿度不能超过85%

Substrate temperature              Should be 4℃(7) above the Dew Point

底材温度                            高于露点以上4℃(7℉)

Storage and Shelf life                         The product should be kept in a cool well ventilated places

                                                                protected  from high temperatures. Containers MUST BE

                                                                kept tightly closed.    Shelf life: 1 year.

储存及有效期                       产品保存于阴凉、通风良好的地方,避 免温度过高。

   容器必须牢固密封。 有效期:1年。

【刷新页面】【加入收藏】【打印此文】 【关闭窗口】
上一篇:PS08 快干型醇酸通用底漆 下一篇:PE04 磷酸锌环氧涂料